Dansercoer
06-30-2009, 06:08 PM
Dear all,
I am a product designer with little experience in piping and was wondering whether you have an idea about where to source next parts?
1) I am looking for a hose end connector with a “grey” metallic look to connect a garden hose to a standard tap without having to twist the hose.
But so far I only found plastic ones like:
http://www.pvl.nl/compiere/afbeeldingen/images.php?image=72055.jpg
2) I am also looking for T-fittings to connect this garden hose to some 2/2-way solenoid valves with 1/8" BSP female thread.
The passage between the two hoses should be at least 8mm in order not to reduce this passage too much.
So far I was thinking of: http://www.tefenplastic.com/technical.php?pid=882 plus a reducer, but maybe there are better solutions like a single piece?
Thank you in advance,
Wouter
I am a product designer with little experience in piping and was wondering whether you have an idea about where to source next parts?
1) I am looking for a hose end connector with a “grey” metallic look to connect a garden hose to a standard tap without having to twist the hose.
But so far I only found plastic ones like:
http://www.pvl.nl/compiere/afbeeldingen/images.php?image=72055.jpg
2) I am also looking for T-fittings to connect this garden hose to some 2/2-way solenoid valves with 1/8" BSP female thread.
The passage between the two hoses should be at least 8mm in order not to reduce this passage too much.
So far I was thinking of: http://www.tefenplastic.com/technical.php?pid=882 plus a reducer, but maybe there are better solutions like a single piece?
Thank you in advance,
Wouter